Modelling what might have been in southeast BC and northwest Wasington

Noxious fumes

Now that all of the new track at Carson and Curlew had been tested by VanRail and other operating sessions, it was time to paint it before we start on the scenery.

I have been using a spray paint made by Rust-Oleum called Specialty Camouflage – Earth Brown. It is very flat and covers well, and seems to stick to the plastic ties.

I clean the tops of the rails after it dries with a special tool I made from a simple piece of aluminum with one end sharpened with a file. The aluminum is softer than the rail, so it does not scratch it, but the paint peels right off with very little effort. The tool needs to be sharpened a few times, as the rail wears a groove in it. I found that if I tried to wipe the paint off while it was still wet, I would manage to hit the ties as well, messing up the nice finish. Also, by carefully using the tool, the tops of non-running rails such as guard rails can be left brown.

Rail cleaning tool.

I have not bothered to try to paint the rails a different colour, as I just don’t have the patience for that. I find that the dark brown colour of the paint seems to make the track just recede from view, and once it is ballasted, it looks fine to me.

Mainline track at Grand Forks after ballasting.

The only problem with this painting method is the fumes. You can’t really take the layout outside to paint it, so the room quickly fills with noxious fumes. I close the door to my workbench area which closes off both it and the layout room from the rest of the house, and I use a respirator when spraying. Afterwards, I run my paint booth exhaust in my workbench area for about 24 hours to clear the air. One window elsewhere in the house is left open a bit to let in fresh air, and it seems to travel through the heating ducts to the train room to replace the air that is being exhausted. This works well and we don’t smell the paint elsewhere in the house.

Curlew masked and painted.
Carson done as well.

While the spray paint works well, I really need to find a suitable acrylic alternative and learn to spray it before I need to paint future track additions.

Leave a Reply

Your email address will not be published. Required fields are marked *